DMVPN Phase 3 with IPsec + IKEv1

Get 30% off ITprotv.com with: You can use promo code: OSCAROGANDO2
Follow Me on Twitter:
https://twitter.com/CCNADailyTIPS

IPsec:


The IP security (IPSec) is an Internet Engineering Task Force (IETF) standard suite of protocols between 2 communication points across the IP network that provide data authentication, integrity, and confidentiality. It also defines the encrypted, decrypted and authenticated packets.

In computing, Internet Key Exchange (IKE, sometimes IKEv1 or IKEv2, depending on version) is the protocol used to set up a security association (SA) in the IPsec protocol suite. IKE builds upon the Oakley protocol and ISAKMP.[1] IKE uses X.509 certificates for authentication ‒ either pre-shared or distributed using DNS (preferably with DNSSEC) ‒ and a Diffie–Hellman key exchange to set up a shared session secret from which cryptographic keys are derived.[2][3] In addition, a security policy for every peer which will connect must be manually maintained.[2]

DMVPN:

A dynamic multipoint virtual private network (DMVPN) is a secure network that exchanges data between sites without needing to pass traffic through an organization’s headquarter virtual private network (VPN) server or router.

This phase allows spokes to build a spoke-to-spoke tunnel and to overcomes the phase2 restriction using NHRP traffic indication messages from the hub to signal to the spokes that a better path exists to reach the target network.

Share the Post:

Related Posts

Help Us By Donating